Golf Cart Mirror Universal with Turn Signal Light Golf Cart Side Mirrors Rear view Mirrors for Club Car EZGO Yamaha

Work great, and visible in day/ night
Love the functionality of these. The led lights on the front and back are easily seen during day light or nighttime. The folding mirrors. Are it easy to throw a cover on/off the cart without it snagging.Mounting was pretty easy, but running the electrical wires through the frame was impossible on mine as there are bolts halfway down that block cavity of the frame.There was also no instruction to run the wiring, only mounting the basic with no lights version.The only updates I would make is1)provide a little groove to run the cable out the side of the mirror mount, as if you run the cable down the outside of the frame, rather than inside, it really smashes the wire down. I had to use a drill to grind a channel out the side for the cable to run through, as I was worried when I tightened down the mounting bolts it would cut the wiring.2) make the mirrors snap back into a set position after being folded in. As is, you have to adjust the angle/position of the mirror everytime you fold them back out.Overall, love these.

Does not come with proper connectors
I would have given these mirrors five stars but there’s some issues that people need to know about. Don’t get me wrong I think the mirrors are great and I would most definitely purchase them again. The issue I had was with the package contents and in particular displacing connectors. The instructions actually show red splice connectors as part of the package but also it says “you don’t need to use these accessories.” Everything is pretty straightforward. In fact if you have similar mirrors but without the turn signal lights, you’re probably just going to need to drill one hole to run the wires through the upright that the mirrors bolt to and down underneath the cowl. All of that actually went pretty smooth. What was a big pain in the butt was the connectors. I guess I could have stopped at that point, driven to AutoZone, threw down a couple of bucks for some different splicing connectors but instead I used what was in the box. It worked but be aware that getting the wires from the turn signal secured in the connector was quite difficult. You actually have to take a razor and shave some of the insulation off the wire to make it a little bit thinner but once you do, with a little bit of force, it will pop right in. The same with the turn signal wire on the car that you’re splicing onto. You have to shave down the insulation and then use a pair of pliers to snap the connector shut. If you shave down enough insulation it should make contact and the lights will work just fine. If not you may have to twist the wire back and forth inside the connector just enough to cut through the insulation make contact. Anyway, it seems like they should have just put the proper connectors in the box instead of putting instructions in there that said don’t use the connectors we supply and by the way we didn’t supply the correct connectors! That’s why you’re only getting four stars turn signal mirror company! Anyway, once they’re hooked up and once all the wires are making connection, these are really really cool! I am pleased with the final product. Too bad there was a connector issue.

Great visibility and turn signals
Easy to install . Fairly easy to connect to existing turn signals. Love the fact that they are visible from front and rear and mirrors are very big. Mirrors provide excellent visibility

Nice product
These are decent mirrors for the price. They work as described and the installation is very simple. Bright on both sides….even in direct sunlight! Wires could be longer and the swivel could be a bit more rigid but I wouldnt hesitate to buy again if needed.